The system works in a set of a control box (controlled by computer), two microwave sensors, two blind region monitor (or LED light), a buzzer and the wire harness which is the perfect connection of microwave and computer. There is blind zone at the rear of the vehicle which is easy to endanger driving safety. When you installed BSM into your lovely car, no matter it's day time, night time or even in the snow, you can be alerted whenever there is a moving object pop into the rear of the vehicle, with the aid of LED lighting on , blinking, buzzer sound so that the driver can be cautious when lane changing to avoid the possibility of side crash accident.
When you get ready to get off, open the door, if someone moves behind, it will also give an accurate alarm. Detection Range Accuracy : 96 Alarm Range : 0.3m-10m System Alarm Accuracy : 96 Alarm method : Method 1 => LED light turn on. Method 2 => LED flash and buzzer sound.
About installation: We Will Send The Product With a Detailed English Instruction(With Installation drawing), Please Read The Instructions Carefully Before Installation!!! Please prepare necessary disassembly tool and protective bumper painted sponge pad or cloth pad. When you disassemble connector, MUST NOT pull wire harness in force, otherwise, will broken the harness. The wire harness should be fixed with the car cable harness by tie band.Neither droop nor abnormal sound. Cut off excess tie band. Disassemble and assemble procedure, please strictly follow our installation manual. Try not to break parts as careful as possible. In case of breakage, please change the parts immediately. Microwave sensor installation cautions points: - Microwave sensor (signal launching surface) can only penetrate the plastic bumper case. Microwave sensor (signal launching surface) in the front, must be no metal intervention.
Should not install microwave sensor opposite to fluorescent light. Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. 1Set Universal Blind Spot Monitoring System.
The item "Car Microwave Sensor Blind Spot Monitoring System Radar Detection LED Indicator" is in sale since Saturday, July 6, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Other".
The seller is "unitedeal" and is located in Getzville, New York. This item can be shipped worldwide.